Ring Stretcher Reducer Pro

Description

This Ring Stretcher Reducer Pro delivers outstanding adaptability and value.

Manufactured from cast iron and European designed, this ring stretcher enables simple and accurate sizing on plain wedding rings (without stones) and non-ferrous metals.

This product comes equipped with one double sided reducing plate, which makes a simple job of reducing down wedding bands, including narrow rings and an unmarked 6 spline stretcher suitable for increasing the size.

Most rings can be sized approximately one size. This item is suitable to size from B-Z+5.

The individual plates have varying sized holes (10mm-28mm diameter) with different degrees of indentations, some being steeper than others.

The Stretcher when closed measures 13mm-23mm diameter and when opened measures; 14mm-24mm diameter.

This Ring Stretcher and Reducer has been designed to be used with non-ferrous metals including Platinum, Palladium, Gold and Silver and is not suitable for use with Steel bands.

It is simple to use and requires greasing on occasion on the main body of the stretcher to prolong the life and operation of the tool.

The base of this product features four holes for mounting the ring stretcher to a workshop table or bench, however fixings ar enot supplied.

Please note, this item does come with instructions.

The Ring Stretcher Reducer Pro weights approximately 25lb.

The ‘V’ Line ring stretcher measures approximately 406mm (16″) in height and the base measures 175mm (7″) by 120mm (4.25″).

It is advised to only stretch and reduce one finger size and to ensure the procedure is performed on both sides of the wedding band.

As this ring stretcher does not have size markings, it is recommended to check the ring size after each stretch to ensure you are working towards the desired measurement.

---

Catalogue Page Number p530

---