Steel Riveting Block

Description

The Steel Riveting Block is ideal for creating your own rivets and for rivetting eyelets.

Made from quality steel, this tool allows you to make your own rivets from 2mm, 1.6mm, 1.3mm and 1mm wire. This tool features;

Four holes running down the middle which are used for cutting your wire flush to your piece, ensuring the correct length every time, suitable for 12G, 14G, 16G and 18G wire.

Two holes at the top of the tool allow you to pre-form your rivet heads using a gas torch suitable for 18G/16G and 14G/12G wire. Four depressions to the left are used to rivet your wire using a rivetting hammer and the three flaring depressions, to the right, are used to rivet eyelets.

Also suitable to be used in a bench vice, this handy tool has three various holes and depressions on one side, which gives better clearance when working with curved material. Please note – ensure you use a vice with rubber jaws, so not to mark the tool.

Catalogue Page Number p554